3 vga monitor connection – IEI Integration SPCIE-C2060 v1.01 User Manual

Page 75

SPCIE-C2060 PICMG 1.3 CPU Card

Page 60

Figure 4-17: USB Device Connection

Step 3:

Insert the device connector. Once aligned, gently insert the USB device

connector into the on-board connector.

4.6.3 VGA Monitor Connection

The SPCIE-C2060 Series has a single female DB-15 connector on the external peripheral

interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect

a monitor to the SPCIE-C2060 Series, please follow the instructions below.

Step 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector

Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

SPCIE-C2060 Series. See Figure 4-18.