beautypg.com

3 sata drive connection – IEI Integration SPCIE-C2060 v1.01 User Manual

Page 69

background image

SPCIE-C2060 PICMG 1.3 CPU Card

Page 54

Figure 4-11: DVI-D/USB Kit Installation

Step 3:

Mount the DVI-D/USB kit onto the chassis. Once the DVI-D/USB kit is

connected to the board, secure the DVI-D/USB kit bracket to the system

chassis.

4.5.3 SATA Drive Connection

The SPCIE-C2060 Series is shipped with four SATA drive cables. To connect the SATA

drives to the connectors, please follow the steps below.

Step 1:

Locate the connectors. The locations of the SATA drive connectors are shown

in Chapter 3.

Step 2:

Insert the cable connector. Press the clip on the connector at the end of the

SATA cable and insert the cable connector into the on-board SATA drive

connector. See Figure 4-12.

See also other documents in the category IEI Integration Hardware: