IEI Integration SPCIE-C2060 v1.01 - Manual (Page 24)

SPCIE-C2060 PICMG 1.3 CPU Card
Page 9
Specification/Model SPCIE-C2060 Series
FDD One 34-pin floppy disk drive connector
Front Panel One 14-pin header (power LED, HDD LED, speaker, power button,
reset button)
I2C One 4-pin wafer connector
Infrared One via 5-pin header
Keyboard/Mouse One 6-pin wafer connector
Parallel Port One parallel port via internal 26-pin box header
Serial ATA Four SATA 3Gb/s connectors (support RAID 0, 1, 5, 10)
Two SATA 6Gb/s connectors (support RAID 0, 1, 5, 10)
Serial Ports Two RS-232 via internal box headers
One RS-422/485 via internal 4-pin wafer connector
SMBus One 4-pin wafer connector
TPM One via 20-pin header
USB Ports Two external USB 2.0 ports on rear IO
Six internal USB 2.0 ports by three pin headers
Environmental and Power Specifications
Power Supply 5V/12V, AT/ATX power supported
Power Consumption [email protected], [email protected] , [email protected], [email protected], [email protected]
(Intel® Xeon® E3-1275 CPU with two 1333 MHz 2GB DDR3 memory)
Operating
Temperature
-10ºC ~ 60ºC
Humidity 5% ~ 95% (non-condensing)
Physical Specifications
Dimensions 338 mm x 126 mm
Weight GW/NW 1200 g / 420 g
Table 1-2: SPCIE-C2060 Series Specifications