IEI Integration SPCIE-C2060 v1.01 - Manual (Page 71)

SPCIE-C2060 PICMG 1.3 CPU Card
Page 56
Figure 4-13: SATA Power Drive Connection
4.5.4 USB Cable (Dual Port) with Slot Bracket
The SPCIE-C2060 Series is shipped with a dual port USB 2.0 cable. To connect the USB
cable connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the SPCIE-C2060 Series USB connector.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.