White’s Electronics Spectra V3 - Manual (Page 43)

Complete Owner’s Guide - Spectra 43
®
• Color – Select color choices for the Icon and Accept/Reject ranges.
• Icon Ranges – ON/OFF. When ON, VDI number range of each Icon dictate their color.
• Accept/Reject – ON/OFF. When ON, Spectragraph block colors indicate if that
VDI number is currently being rejected or accepted by the current discrimination
settings or program. Red = Reject. Green = Accept.
• Sizing – Selects the size and location of each feature.
• Depth – ON/OFF. When ON displays average depth over multiple search coil sweeps.
• Signal – ON/OFF. When ON displays average signal strength over multiple search
coil passes.
• Rate – Adjust calibration of sizing graph.
• Rule – Displays sizing referencing scale at bottom of sizing graph.
• Sweep Speed – Adjust calibration of display sizing reference gage at bottom of sizing graph.
• Title – ON/Off. When ON, indicates the frequency for each target signal indication.
• Mark Target – ON/OFF. When ON, applies sizing reference marks on sizing graph.
•
Pinpoint – Feature selections for the Pinpoint mode (toggle squeezed and held).
• Depth Indication – Select Format and size of depth reading during pinpoint mode use.
• Format – Selects format of depth indication in the pinpoint mode
(toggle squeezed and held).
• Integer –ON/OFF standard numbered depth indication (upper right
side of display) during pinpointing (toggle squeezed and held).
EXAMPLE: 26
• Decimal – ON/OFF depth indication with decimal during pinpointing
(toggle squeezed and held). EXAMPLE: 26.5
• Fraction – ON/OFF fractional depth indication during pinpointing
(toggle on and held). EXAMPLE: 26
• Size – Selects the size of the depth indication during pinpointing
(toggle squeezed and held).
• Scan – ON/OFF. When ON pinpoint indication scrolls.
• Depth – Average depth indication over multiple search coil sweeps.
• Signal – Average target signal strength over multiple search coil passes.
• Scroll Rate – Speed and resolution of scrolling graph.
• Rule - Displays reference scale at the bottom of signal graph.
• Title - ON/OFF. When ON, labels each frequency in use on graph.
• Meter – Select type of presentation to show on display for a target signal.
• Depth – ON/OFF. When ON, depth indication shown during pinpointing,
• Signal – ON/OFF. When ON, target signal strength shown during pinpointing.
• Fade Rate – Adjust rate the depth indication fades (resets) when the search
coil is no longer over a target.
• Rule – ON/OFF. When ON, provides a reference scale for depth indication.
• Analysis – Selects among options for the Analysis mode (toggle on grip pressed forward
away from grip).
• Pinpoint Scan – ON/Off. When ON, selects scrolling pinpoint indication for
Analysis mode.
• Depth – ON/OFF. When ON averages depth indication over multiple search
coil passes.