White’s Electronics Spectra V3 - Manual (Page 31)

Complete Owner’s Guide - Spectra 31
®
• Note: The other Spectra has to be set to RECEIVE, on the same channel as you are sending.
• Saved Programs; Select a program from your Menu or Live Control listing.
• Library, select All Programs or just an individual Program to send from your Library.
• Channel; select a channel free of interference (majority green in bar) and select
same channel within other Spectra (Receive Unit).
• Speed; Select the speed the data is sent, mid range to slower speeds generally more reliable.
• Receive - a program from another Spectra that is Transmitting.
• ENTER, then select how to receive the program.
• ASK, Asks you (after receiving) how and where to save each program.
• STOP – Stop receiving Programs.
• Ignore – Don’t SAVE this Program (skip).
• Create Library – Add Program to existing Library.
• Create Program – Add Program to regular MENU and Live Controls
(if there is room) , not Library.
• Update Library – Replace existing library programs with new programs being received.
• Create Library – Add receiving Programs to existing Library.
• Create Program – Add receiving Programs only to Menu & Live Controls (if there is room).
• Update Saved – Replace Programs of same name with new received Programs.
• Update Current – Update only Programs of same name on Menu and Live Control listings.
• Don’t Rename – Keep same name as sent. A. B. C. added to front of new programs
using an existing name.
•
Library – Storage for less often used programs.
• Store – Place a Program in the library. Doing so makes room to place other programs on your
Live Controls and standard Menu. A person may want to store all but 2-3 programs in the
library. There is a limit to the number of PROGRAMS that can be stored on the Live Controls
and standard Menus. The Library provides storage for many less frequently used programs.
• ARROW to STORE and press ENTER.
• ARROW Up & Down to select a program to store in Library.
• MENU/TAB to Create and press ENTER, or Cancel and press ENTER.
• Rename – Rename programs already in the Library.
• ARROW to Rename and press ENTER.
• ARROW to select the Program you want to re-name.
• MENU/TAB to New Name.
• ARROW to spell out new name or press ENTER to bring up the key-board
then ARROWS and ENTER to spell out new name.
• MENU/TAB to Rename or Cancel, ENTER to activate choice.
• Erase – Erase programs from the Library.
• Select Erase and press ENTER.
• ARROW to select the program to erase.
• MENU/TAB to Erase or Cancel, ENTER to activate choice.