WansView NCB546 - Manual (Page 7)

http://www.wansview.com
6
2 Installation guide
2.1 Operation of connecting to LAN
Power on the IP camera（ please check carefully the voltage of power adaptor, don‟t
insert incorrect power, otherwise it will damage the device ）, connect IP camera to
router by network cable, meanwhile, connect computer to the same router, example
of figure 1.
Figure 1
Insert CD to computer driver, double click “BSearch_en.exe” in the CD, will pop up
the interface as figure 2, please operate as the following steps:
Figure 2