Ddns setting – WansView NCB546 User Manual
Page 14
http://www.wansview.com
13
enabled. Not all the routers support UPnP perfectly. Please test if the router works well
with the equipment, if not, we suggest you to disable this function and do the
port-forwarding manually.
3.2.5 DDNS Setting
If doing port forwarding successfully, and visit the camera via ip address in WAN, you
also can visit it via DDNS.
Manufacturer’s DDNS
Manufacturer puts a label of DDNS at the bottom of each IP Camera, it is unique，the
manufacturer has established a DDNS system, and allotted a DDNS to every device, the
user only enter the website into browser, and then view it from remote PC, example of
figure 13.
Figure 13 Manufacturer‟s DDNS
Third Party DDNS
User can also use third party DDNS, such as
User must apply a free
domain name from this website and fill the info into the below blanks (Figure 14) and
save the settings. Then the domain name can be used.
Figure 14 Third Party DDNS setting
Notice：Using the third party domain name, if the http port is not 80, the port number
should be adding to the domain name with colon. Example