Time setting, Firmware upgrade, Restore factory default – WansView NCB546 User Manual
Page 21: User browsing log
http://www.wansview.com
20
3.5.3 Time Setting
If the device is connected to the Internet, you enable the NTP server to correct the time
and need to select the correct time zone. Otherwise
you should use the PC‟s time to
correct its time.
Figure 26 Date and time settings
3.5.4 Firmware upgrade
Figure 27 Upgrade firmware
The camera runs two kinds of firmware, one is system firmware, another is application
firmware, can upgrade them respectively.
3.5.5 Restore Factory Default
Click “Restore Factory Default”, it will pop up a dialogue to confirm if you really want to
restore the factory default. After confirmation, the system will restore the factory default
and reboot.
3.5.6 User browsing Log
After enter the log interface, you can view who and when the device is visited.
Figure 28 Visit log