Vestil VGP-100 - Manual

rev. 2/15/2013 Product manual, operation instructions.doc
Copyright 2013 Vestil Manufacturing Corp. Page 1 of 5
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: [email protected]
VGP-100 P
IPE
M
OVER
H
AND
T
RUCKS
I
NSTRUCTION
M
ANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)
the instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment while
assembling, installing, using or maintaining this product.
Table of Contents
Hazard identification: explanation of signal words……………………………………………………………………. 2
Safety Guidelines…………………………………………………………………………..………………………….….2
Exploded parts diagrams and bills of materials………..……………………………………………………………...
3
Label placement diagram ………….. …………………………………………………………...................................4
Limited warranty………………………………………………………………………………………………………….. 5