Vestil S-FORK-4-AT - Manual (Page 3)

S-Fok-4-AT manual 07/19/11
 DO NOT attempt to lift a load that weighs more than the rated load of the attachment OR the lift truck, whichever is
smaller. ALWAYS make sure that the net weight applied to the fork attachment does not exceed the rated load of the
attachment OR the lift truck, whichever is smaller.
 DO NOT lift a load higher than necessary. (See “Use Instructions” on p. 4).
 DO NOT raise a load above a person(s) or allow anyone to stand or reach beneath a suspended load.
 NEVER use the device to lift a load over people or to lift any apparatus that supports people, such as a work platform.
To maximize the service life of the fork attachment:
 Use only replacement parts supplied or approved by the manufacturer.
 ALWAYS store the S-Fork in a dry location that shelters it from the elements to prevent damage that might occur if
contact with water or other liquids occurs.
 Maintain the product as suggested in “Maintenance & Inspections” on p. 5.
FIG. 1: S-Fork-4-AT Exploded Parts Diagram
Tine lock
Cold shut (point of
attachment to fork
tube for nylon
safety strap)
Safety strap:
End connected
to cold shut
Snap hook
Item No. Part No. Description Quantity
1 08-528-218 Fork tube weldment 1
2 08-514-218 Tension arm weldment 1
3 13211
1
/
2
inch – 13 x 2 inch HHCS #5 zinc-plated bolt 1
4 37030
1
/
2
inch – 13 nylon insert lock nut 1
5.1
5.2
08-145-003
Bow Shackle: 2-ton maximum rated load
Shackle pin
1
6 08-145-001 Load hook: 2-ton maximum rated load 1
7 08-145-028 Fork attachment safety strap 1
Page 3 of 7
Copyright 2011 Vestil Manufacturing Corp.