Vestil CH series - Manual (Page 4)

P
RODUCT
I
NTRODUCTION
Thank you for purchasing an Overhead Coil Hook (“coil hook”
or simply “the hook”) made by Vestil Manufacturing Corporation
(“Vestil” or “Manufacturer”). Each coil hook is a durable, high-
quality product that combines safety features and superior lifting
capabilities. Despite ease of use, all personnel must familiarize
themselves with the safe operation instructions provided in this
manual.
We produce 3 types of coil hook, the CH-10-6, CH-10-12, and CH-20-8. All
coil hooks are constructed from steel and are given a paint finish. The three
models are distinguishable by lifting capacity: 10-6’s and 10-12’s are rated for
loads weighing up to 1,000 pounds, and the 20-8’s can handle loads weighing as
much as 2,000 pounds. All models incorporate a bracket weldment that retains
the load within the hook.
Vestil Manufacturing Corp. created this manual to acquaint owners and
users of our coil hooks with safe use and maintenance procedures. Employers
are responsible for instructing employees to use the product properly.
Therefore, employees and any other person(s), who might foreseeably use,
install or perform maintenance on the coil hook, must read and understand
every instruction before using the device. Persons who use the hook
should have access to the manual at all times, and in particular should
consult the directions before each use. Contact Vestil for answers to any
question you have after reading the manual.
Although Vestil strives to identify the hazardous situations that could arise
during use, this manual cannot address every conceivable danger. The end-user
is responsible for exercising sound judgment at all times.
- 4 -