Vestil CH series - Manual (Page 12)

normal operating condition, such as tightening loose fasteners, or removing debris from the surface of the
hook. A modification is a change that alters the hook from normal operating condition, like bending the
structural members. NEVER modify the coil hook without the express, written approval of Vestil.
Modifications may render the coil hook unsafe to use.
DO NOT use the coil hook if adjustments and/or repairs are incomplete! Return the hook to service
ONLY after finishing all necessary repairs and/or adjustments.
Step 5: Perform a periodic inspection, as recommended in ASME B30.20.
Step 6: Make a dated record of the repairs, adjustments and/or replacements made.
Hazard Identification Labels:
Only use the coil hook if ALL of the labels are readable and undamaged. Contact Vestil for replacement
labels.
FIG. 3: Product safety label placement
Manufacturer’s
Name Label Unit Capacity
Label
“Made in USA”
“Keep clear of pinch points”
“Made in USA”
- 12 -