TREND LCI_USB - Manual (Page 2)

2 LCI/USB Installation Instructions TG200817 Issue 2 20/03/2009
LCI/USB Installation Instructions
3 INStaLLatION
(continued)
Connect to pC
4
LON
LONOK
ON
USB
LCI Type B
USB Cable supplied
Type A
Caution: Do Not remove the USB
connector during use.
Note that the LCI may only be used to access a
local IQ system, connection to remote systems
using TMN or other similar communication nodes
is not supported.
Obtain USB Drivers
3
PC
From SET v6.4 or greater the drivers are located in ‘Program Files\Trend Control
Systems\Support Files\LCI USB Drivers’ directory on the PC.
Internet
1 Download ‘LCI-USB Drivers.zip’ to an empty directory from the PartnerNet web
site (http://pnet.trend-controls.com). Password required.
2 Unzip ‘LCI-USB Drivers.zip’.