TREND EDS-305 - Manual (Page 8)

— 5 —
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back panel of EDS when
you take it out of the box. If you need to reattach the DIN-Rail attachment plate to EDS, make sure
the stiff metal spring is situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail into the
slot just below the stiff metal spring.
STEP 2:
The DIN-Rail attachment unit will
snap into place as shown below.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove MOXA EtherDevice Switch from the DIN-Rail, simply reverse Steps 1 and 2 above.