TIF RX-1A Refrigerant Leak Detector - Manual (Page 11)

Power Supply: 3V DC; two “C" cell Alkaline batteries
Maximum Sensitivity: Per SAE J1627 Rating Criteria
Certified @ 0.5 oz/yr. (14gr/yr)
Ultimate sensitivity
TIFXL-1A less than 0.4 oz/yr (11 gr/yr) for all
Halogen based refrigerants.
TIFRX-1A less than 0.25 oz/yr (7 gr/yr) for all
Halogen based refrigerants.
Sensing Tip Life: Approximately 20 hours
Operating Temperature: 30° -125° F (0° to 52° C)
Battery Life:
TIFXL-1: Approximately 40 hours normal use
TIFRX-1A: Approximately 30 hours normal use
Duty Cycle: Continuous, no limitation
Response Time: Instantaneous
Reset Time: One second
Warm-Up Time: Approximately 2 Seconds
Unit Weight: 1.2 pounds (560 grams) (with batteries)
Unit Dimensions: 9" x 2.5" x 2.5"
(22.9cm x 6.5cm x 6.5cm)
Probe Cord Length: 14" or 35.5 cm
This instrument has been designed and manufactured to provide unlimited service.
Should the unit be inoperative, after performing the recommended maintenance, a
no-charge repair or replacement will be made to the original purchaser if the claim is
made within TWO years from the date of purchase. This warranty applies to all
repairable instruments that have not been tampered with or damaged through
improper use. This warranty does not cover batteries, sensing tips, tip protectors, or
any other materials that wear out during normal operation of the instrument.
Before returning your instrument for repair please make sure that you have carefully
reviewed the Unit Maintenance section of this manual to determine if the problem
can be easily repaired. Make sure that you have either replaced or cleaned the
sensing tip and tip protector and that the batteries are working properly BEFORE
returning the unit. If the instrument still fails to work properly please call the
Customer Service Department for an RMA number (800) 327-5060. Pack the instru-
ment and send the unit to the repair facility address on the back cover of this manu-
al. Repaired or replaced tools will carry an additional 90 day warranty. For more
information please call (800) 327-5060.
9
WARRANTY & REPAIR
SPECIFICATIONS