Avaya 1140E IP - Manual (Page 115)

Configuring the Avaya 1140E IP Deskphone
115
LED There are two LEDs on the adapters, one for
the mute status and the other for message
waiting. These two LEDs are also mapped
to the corresponding LEDs on the
IP Deskphone. The IP Deskphone
synchronizes the LEDs status with that of
the IP Deskphone: the Mute LED for mute
indication and the Message Waiting LED for
message waiting and incoming call (flash)
indications. The Avaya USB Enhanced
Adapter has an extra port to connect an
external alerter. If there is an external alerter
attached, the external alerter is kept
synchronized with the Message Waiting
LED.
Attached Indicator When a Avaya USB Mobile or Enhanced
headset is connected to the IP Deskphone,
after enumeration, the IP Deskphone
flashes the LEDs on the headset for a short
duration to indicate the headset is ready to
use.
Back Light Both adapters have a back light to allow
easy identification of the adapters. If the
back light is enabled in the headset screen,
the back light of the adapter turns on after
enumeration.
Message Waiting If there is voice message waiting on the
IP Deskphone, the IP Deskphone turns on
the red message waiting LED on the
IP Deskphone and on the adapter. The
IP Deskphone turns off the red message
waiting LED if there is no voice message
waiting.
Feature Description