Teledyne LeCroy QPHY-SAS2 - Manual (Page 20)

20
917718 Rev A
Figure 13 – LeCroy SAS Protocol Suite Data Block Configuration
14. Click on the Delete All button to delete the current data block information
15. Click on the Load button (lower right corner) to select a new data block to load.
a. Select SAS2_PortA_Diagnostics.txt to load the data block for testing the A (primary) port of the
target.
b. Select SAS2_PortB_Diagnostics.txt to load the data block for testing the B (secondary) port of the
target.
16. Click on the lower „X‟ in the upper right hand corner to close the data block window.