Teledyne LeCroy ST Automated Test Suite User Manual - Manual (Page 11)

11
3. Operation of the Automated Test Suite Software
When an initial test run starts, the software takes the following steps:
1) The Run all button starts execution in sequential order of all tests in the Test Monitoring Console.
2) Within the Output Window:
Start Recording indicates that the Analyzer begins recording traffic.
Start Generation indicates that the Trainer starts to execute the test script.
Waiting displays while the test is executing.
Stop Generation displays when the test script has finished executing.
Stop Recording displays when the Analyzer has stopped capturing data and automatically
begins uploading the trace file.
Run Verification Script indicates the appropriate verification script has been retrieved and is
automatically analyzing the results of the test.
Passed or Failed displays based on the result of the test.
Finished displays after the test result updates in the Test Monitoring Console.
Retry displays when Fail is logged for a given test and the automatically re-run test option is
enabled in the Settings dialog.
3) Within the Test Monitoring Console:
Pass, Fail, or N/A is added to the Results column.
Error codes are added to the Description column.