Msg.dec – Teledyne LeCroy Protocol Analyzers File-Based Decoding User Manual User Manual
Page 69

File-based Decoding User Manual
LeCroy Corporation
63
msg.dec
Description: msg.dec is a message data script decoder.
Input Data Fields
in.Channel: Direction of the traffic: 0 = Upstream, 1 = Downstream. The following
constants are defined for the possible values:
•
_CHANNEL_UPSTREAM
•
_CHANNEL_DOWNSTREAM
in.Speed: Speed of the traffic: 0 = 2.5 GT/s, 1 = 5.0 GT/s, 2 = 8.0 GT/s. The following
constants are defined for the possible values:
•
_SPEED_GEN1
•
_SPEED_GEN2
•
_SPEED_GEN3
in.LinkWidth: LinkWidth of the traffic: 1, 2, 4, 8, 16. Represents the number of lanes on
the link.
in.Data: Data block to decode
in.DataLength: Length of data block in bytes
in.PrepareFldsForDlg: If not 0, means that script should prepare decoded fields for
presenting them in a special dialog.
in.Type: Request type:
•
_TLP_TYPE_ID_IORD
•
_TLP_TYPE_ID_IOWR
in.FirstByteEnabled: Index of first enabled byte in data block
in.EnabledByteCount: Number of enabled bytes in data block
in.MessageCode: Message code:
•
_TLP_MSGCODE_ASSERT_INTA
•
_TLP_MSGCODE_ASSERT_INTB
•
_TLP_MSGCODE_ASSERT_INTC
•
_TLP_MSGCODE_ASSERT_INTD
•
_TLP_MSGCODE_DEASSERT_INTA
•
_TLP_MSGCODE_DEASSERT_INTB
•
_TLP_MSGCODE_DEASSERT_INTC
•
_TLP_MSGCODE_DEASSERT_INTD
•
_TLP_MSGCODE_PM_ACTIVESTATENAK
•
_TLP_MSGCODE_PM_PME
•
_TLP_MSGCODE_PM_TURNOFF
•
_TLP_MSGCODE_PM_TOACK
•
_TLP_MSGCODE_ERR_COR
•
_TLP_MSGCODE_ERR_NONFATAL
•
_TLP_MSGCODE_ERR_FATAL