Teledyne LeCroy PCIe Gen3 M.2 Interposer Quick Start - Manual

Gen3 M.2 Interposers
Quick Start for Summit™
Analyzers
Before Starting
Use this document for quick installation and
setup. If you experience problems or need more
information, see the product manuals available at
the Teledyne LeCroy web site or in the
Documents folder in the PETracer installation
CD.
1
Introduction
The Teledyne LeCroy PCIe 3.0 M.2 Interposer, which is used with Summit™ Protocol Analyzers,
enables PCIe
®
bus traffic between a system board or tablet and a M.2/NGFF connector on a PCIe
M.2 device to be monitored, captured, and recorded for protocol analysis. The M.2 interposer will
support analysis for PCIe host interfaces such as SATA Express (AHCI/PCIe) and NVM Express
(NVMe) at data rates from 2.5 GT/s up to 8 GT/s, and lane widths of up to x2 or up to x4 depending on
the key type.