Teledyne LeCroy BPT - Users Manual - Manual (Page 9)

3
CATC BPT 1.00 C HAPTER 1
User’s Manual Introduction
1.6 System Requirements
The following is the recommended configuration for the host machine that runs the BPT
application and is connected to the BPT hardware unit.
• Operating system: Microsoft® Windows® 98 SE, Windows 2000, Windows Me, or
Windows XP operating system.
• Required setup: Microsoft Internet Explorer 4 or later must be installed.
• Processor: For optimum performance, use processors of the Intel® Pentium® III or
Pentium 4 family, the AMD® Athlon® or Duron® family, or other compatible proces-
sors with clock speed of 500mHz or higher. Must have, as a minimum, a processor from
the Intel Pentium II or Celeron® family, AMD-K6® family, or equivalent with clock
speed of 300mHz.
• Memory: Minimum of 64 MB of RAM is recommended.
• Hard disk: Minimum 2 GB hard disk with at least 650 MB of free space is required.
• Display: Resolution of 1024 x 768 with at least 16-bit color is recommended (resolution
of 800 x 600 with 16-bit color is a minimum).
• Connectivity: A USB interface is required to connect the host computer to the BPT
hardware unit.