Teledyne LeCroy AP031 - Manual (Page 4)

AP031 Probe
2 923064-00 Rev A
Safety Instructions
This section contains instructions that must be observed to keep this oscilloscope accessory
operating in a correct and safe condition. You are required to follow generally accepted
safety procedures in addition to the precautions specified in this section. The overall safety
of any system incorporating this accessory is the responsibility of the assembler of the
system.
Symbols
These symbols may appear on the probe body or in this manual to alert you to important
safety considerations.
HIGH VOLTAGE, risk of electric shock.
CAUTION of potential for damage to probe or instrument it is connected to or WARNING
of potential bodily injury. Attend to the accompanying information to protect against
personal injury or damage. Do not proceed until conditions are fully understood and met.
ELECTROSTATIC DISCHARGE (ESD) HAZARD. The probe is susceptible to damage if anti-
static measures are not taken.
ON (POWER)
OFF (POWER)
DOUBLE INSULATION
MEASUREMENT GROUND TERMINAL