beautypg.com

Autostart AS-2775 User Manual

Page 22

background image

P. 22 Installation

Guide

¾

Standard Secure Lock:

If this Option is selected, upon receiving a remote

START

signal, secure lock will unlock

the doors

(disarming the factory Alarm); 1/2 second after the remote start, it will relock the doors. Four
seconds after shutdown, secure lock will relock all doors (arming the system once again).
Please note that most OEM systems will not rearm the alarm while the engine is running, but will
lock the doors.

¾

Smart Secure Lock:

If the vehicle was previously locked with the remote starter transmitter, at remote start the module
will send an unlock/disarm

pulse before start-up, lock/arm

when the engine is running, and

lock/arm

once again 4 seconds after it shuts down the engine.

If the vehicle is initially unlocked, upon remote start the module will start the engine and arm the
starter kill, but the doors will not be locked or unlocked at any moment of the sequence.

Starter Kill Arming Mode

The Starter Kill (if installed) can be configured by the installer either to Passive Mode (so as to arm
automatically) or Active Mode (so as to require the user’s intervention for arming). By default, the
Remote Car Starter is configured to Passive Mode.

¾

Passive mode:

• To arm the Starter Kill, press the

LOCK

button on the transmitter, OR

• In Passive Mode, the Starter Kill will also automatically arm 1 minute (by default) or 3 minutes

(if configured this way) after the ignition is turned

OFF

or once the last door is closed (if the

doors are monitored).

- The LED on the antenna will flash quickly during the countdown preceding the
activation of the Starter Kill.
- Once the activation countdown expires, the LED will send a series of quick double
flashes to indicate that the Starter Kill is now armed.

• To disarm the Starter Kill, press the

UNLOCK

button on the transmitter.

- The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes
(if configured this way) if no door is left opened (if the doors are monitored) and the
ignition is not turned

ON

.

¾

Active Mode:

• To arm the Starter Kill, press the

LOCK

button on the transmitter.

- The parking lights will flash once.
- The LED on the antenna will flash slowly.
- If remote door locks are installed, this will also lock the doors and arm the OEM-style
alarm.

• To disarm the Starter Kill, press the

UNLOCK

button on the transmitter.

- The parking lights will flash twice.

- The LED on the antenna will remain

OUT

.

- If remote door locks are installed, this will also unlock the doors.

Lock Pulse Duration

Option 1: 7/10-sec.

LOCK

and 7/10-sec.

UNLOCK

pulses by default.

Option 2: 4-sec.

LOCK/UNLOCK

pulses.

Option 3:

A single 7/10-sec.

LOCK

pulse and two ¼-sec.

UNLOCK

pulses.

Used for double-pulse Disarm/Unlock systems

Option 4: 1/10-sec.

LOCK

and 1/10-sec.

UNLOCK

pulses.