Teka IR 950 - Manual (Page 29)

Operation GB
29
Power boost setting
(cooking zones marked with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
1. Switch on the hob.
2. Press the power key once. The control lamp above the key will blink
for approx. 5 sec.
3. Then press the respective Plus key or Minus key in order to
allocate the function to a specific cooking zone.
The symbol P is shown and the power boost setting has been switched
on.
4. After 10 minutes the power boost setting will switch off automatically. The
symbol P will go off and the power level will switch down to 9.
Please note:
In order to prematurely de-activate the power setting, press the Minus key
.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
blinks
Modules (power management)