Amana Bottom Mount Refrigerator - Manual (Page 57)

B136CKR1 and B136CKL1 Custom Handle Kit
November 1996 57 RS1200001
5. See "Procedures, Refrigerator Door", steps 3
through 5 for panel assembly procedure.
6. Align panel in trim and push evenly. Start at one end
and work across. For smoother installation, apply
bar soap on door trim and freezer trim.
7. Replace side trim by inserting five, 3/8" screws.
8. Replace trim insert. Start one edge of insert in track
and press other edge into track while working up
side of door.
9. Install new top trim by replacing five, 1" screws.
10. Cut new handle insert to a length of 35 1/4". Install
new trim insert. Start one edge of insert in track and
press other edge into track while working up side of
door.
11. Optional: install filler block on top of top trim using
1" wide double sided foam tape provided.
• For dimensions of filler block see "Freezer Drawer
Top Wood Spacer Right Side Hinge Cutout
Dimensions" pages 5, or "Freezer Drawer Top
Wood Spacer Left Side Hinge Cutout Dimensions"
page 6 of this manual.
• Double sided tape is provided in three, 10" strips.
• Verify placement of filler block before applying
double sided tape. Tape cannot be removed once
applied to filler block.
Side trim
Top trim
3/8"
screws
Trim
insert