Sunex Tools SX235KTB - Manual

SX235KTB 1 Rev. 05/02/02
Operating Instructions • Warning Information • Parts Breakdown
SX235KTB
S
HORT
A
IR
H
AMMER
SPECIFICATIONS
Blows Per Minute ..................4,500
Bore ..................................11/16"
Stroke ................................1-5/8"
Air Inlet............................1/4 NPT
Hose Size ........................3/8" I.D.
Air Pressure ........................90 PSI
Air Consumption..................4 CFM
Sound Level......................105 dBA
Length ................................5-1/2"
Shipping Wt.................3-9/16 lbs.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.