Sunex Tools SX70C - Manual

SX70C: Parts Breakdown & Operating Manual rev. 04/28/06
Operating Instructions • Warning Information • Parts Break­down
SPECIFICATIONS
Fluid Orifice .................................................................................. 1.3mm
Air Inlet: .......................................................................................... 1/4" NPT
Rec. Max. Inlet Pressure ......................................................................60 PSI
CFM: .......................................................................................... 7.2 at 50 PSI
Nozzle Pressure ...................................................................................47 PSI
Cup Size ............................................................................................. 1000cc
SX70C
Spray Gun
and Cup
AlwAys reAd instructions
before using power tools
AlwAys weAr
sAfety goggles
weAr heAring
protection
Avoid prolonged
exposure to vibrAtion
some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals
known to cause cancer, birth defects or other
reproductive harm. some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks
and cement and other masonry
products, and
• arsenic and chromium from
chemically-treated lumber.
your risk from these exposures varies,
depending on how often you do this type
of work. to reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.