Sunex Tools SX264 - Manual

SX264: Parts Breakdown & Operating Manual 1 Rev. 05/18/10
Collet Size .....................................1/4"
Max. Free Speed ............ 20,000 RPM
Weight .....................................1.03 LB
Length ...........................................5.5"
SX264
1/4" MINI
RIGHT
ANGLE DIE
GRINDER
Average Air Consumption ....... 4 CFM
Air Inlet ................................. 1/4" NPT
Air Supply Hose Size .............3/8" I.D.
Sound Level ......................... 93.2 dBA
SPECIFICATIONS
AVOID PROLONGED EXPOSURE TO VIBRATION
RPM OF CUTTING WHEEL MUST MEET OR
EXCEED RPM OF TOOL (20,000 RPM)
WEAR HEARING PROTECTION
ALWAYS WEAR SAFETY GOGGLES
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
Some dust created by power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
RPM RPM RPM
WARNING
WARNING
Operating Instructions • Warning Information • Parts Break down