Sunex Tools SX278C - Manual

SX278C 1 Rev. 05/02/02
Punch Hole Size . . . . . . . . . . .8MM
Capacity . . . . . . . . . . . .14 Gauge
Air Inlet . . . . . . . . . . . . . .1/4 NPT
Hose Size . . . . . . . . . . . .3/8" I.D.
Air Pressure . . . . . . . . . . . . .90 PSI
Air Consumption . . . . . . . . .4 CFM
Length . . . . . . . . . . . . . . . . . . .10"
Net Weight . . . . . . . . . .3-1/2 Lbs.
SPECIFICATIONS
Operating Instructions • Warning Information • Parts Breakdown
SX278C
8 MM P
UNCH
/
F
LANGE
T
OOL
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.