Sunex Tools SX0918T - Manual

SX0918T: Parts Breakdown & Operating Manual 04/19/10
Operating Instructions • Warning Information • Parts Break down
Rivet Capacity ............................3/16"
Traction Power................1,983 ft. lbs.
Air Pressure .........................75-90 psi
Stroke Length ...........................11/16"
SX0918T
3/16" HEAVY
DUTY RIVET
GUN
Height ...................................... 12-3/8"
Weight .................................... 3.52 lbs
Minimum Hose Size ..............3/8" I.D.
Air Inlet ................................. 1/4" NPT
SPECIFICATIONS
• Always read instruction manual carefully
before use.
• Always wear safety goggles
(User and bystanders).
• Always wear hearing protection
(User and bystanders).
• Avoid prolonged exposure to vibration
• Always disconnect air supply before proceeding
with any assembly or disassembly procedures.
• Do not exceed 100 psi max. air pressure.
• Inspect hydraulic section prior to use.
Do not use if cracked.
• Always follow proper maintenance procedures.
• Keep exhaust port pointed away from face.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
WARNING
WARNING