Sunex Tools SX7625 - Manual (Page 3)

Instruction Manual
This tool is designed for sanding. No other use is permitted.
Air Supply Requirements
Tool is designed to operate at 90 psi (6.2 bar) at free speed
measured at the tool, of clean, dry air. Operating this tool at
higher pressures will drastically reduce the tool life and could
cause injury.
The air inlet thread on this tool is a standard 1/4" NPT.
Line pressure should be increased for any unusually long
air hose run (over 25 feet). Minimum hose diameter should
be 3/8" I.D. and all fittings should have the same inside
diameter. See diagram below for proper air supply setup.
Lubrication
Lubricate the tool each day after use with quality SAE #10
air motor oil. Add the oil to the air inlet or into the hose at the
nearest connection to the air supply, then run the tool until
all excess oil is expelled from the exhaust. Total oil quantity
needed for this procedure is approximately 1 ounce. If using an
air line lubricator adjust to two drops per minute.
EC DECLARATION OF CONFORMITY
We, Sunex International Inc., 315 Hawkins Rd, Travelers Rest,
SC 29690, declare under our sole responsibility that the
product to which this declaration relates, is in conformity with
the requirements of the Council Directive of June 1998 on the
approximation of the laws of the Member States relating to
machinery. (EN792, 98/37/EC)
Harmonized Standards Applied:
EN 792-6
National Standards Applied:
ISO 8662-7, ISO 15744-2002
Machine Name:
SX7625 6" Random Orbital Sander (3/32” Orbit)
SX7650 6" Random Orbital Sander (3/16” Orbit)
Serial No.:
SB012010 or higher
Techical Data:
Pad Diameter: 6"
SX7625 Orbit: 3/32"
SX7650 Orbit: 3/16"
Free Speed: 12,000 RPM
Air Pressure: 90 psi (6.2 bar)
Noise and Vibration Declaration
Tool produces a noise level (no load) of 82 dBA sound pressure
with 3 dBA uncertainty per EN ISO15744-2002. Vibration level
is <2.5 m/s² tested per EN 28662-1 & EN28662-7:1997
Signature of Issuer:
Name and Position of Issuer: John Stratton, Product Manager
Sunex International Inc.
Date of Issue: January 4, 2012
Drain Daily
Regulator Oiler Quick Coupler Leader
Hose
Nipple
Do Not Install
Quick Coupling
Here
Nipple
Filter
Air Supply
Whip Hose
Specifications
Pad Diameter ......................................................6" (152mm)
Orbit (SX7625) ............................................... 3/32" (2.5mm)
Orbit (SX7650) .................................................. 3/16" (5mm)
Free Speed ........................................................ 12,000 RPM
Length .............................................................7.3" (185mm)
Weight ....................................................... 1.98 Lbs. (.90 kg)
Avg. Air. Cons. ...............................................2 cfm (57 l/min)
Air Inlet ................................................................... 1/4" NPT
Min. Hose Size ............................................ 3/8" I.D. (10mm)
SX7625/SX7650: Parts Breakdown & Operating Manual 3 2/3/12
SX7625_SX7650_Manual_020312.indd 3 2/3/12 3:18 PM