AeroComm TRANSCEIVER ZB2430 - Manual (Page 45)

E E P R O M P A R A M E T E R S 4 0
MAC ID 0x80 8 0x00 - 0xFF Factory programmed 8 byte unique IEEE MAC
address.
Note: This address is write protected and can-
not be modified.
Part Number 0x90 16 0x00 - 0xFF Provides part number information. EEPROM
byte 0x95 can be read to determine device type
(C, R, or E).
API Control 0xC1 1 0x00 - 0xFF 0xF8 Settings are:
bit-7: Reserved
bit-6: Reserved
bit-5: Reserved
bit-4: Reserved
bit-3: Reserved
bit-2: API Send Data Complete
0 = Disabled
1 = Enable
bit-1: Transmit API
0 = Disabled
1 = Enabled
bit-0: Receive API
0 = Disabled
1 = Enabled
RSSI Threshold 0xC8 1 0x00 - 0xFF The minimum RSSI required. Packets received
with a weaker RSSI than this threshold will be
discarded.
D.O.B. 0xE0 4 Provides factory calibration and test date.
Ta b l e 9 : E E P R O M P a r a m e t e r s
Parameter
EEPROM
Address
Length
(Bytes)
Range Default Description