Special – Staub Electronics WPS-750-BUL-AH WIREPATH - SURVEILLANCE 750-SERIES BULLET ANALOG OUTDOOR CAMERA WITH IR AND HEATER (650TVL) User Manual

Page 21

WPS-750-BUL-AH Installation Manual

COLOR ADJUST
Adjust the color of the image.

INITIAL SET
Return to factory default setting.

PREVIOUS
Return to previous page.

SPECIAL

ITS MODE
Intelligent Traffic System Mode allows for setup

of the camera in DAY and NIGHT modes to better

see license plates in bright light conditions ypically caused by car
head lamps. Settings adjust the speed of the shutter

and AGC based on environmental conditions.

MOTION DET Setting
The Motion Detection Menu allows up to 8
zones of motion detection. When an object
in one of the zones moves, the camera will
display MOTION AT: XX and highlight the box
around the zone of motion. This allows for
monitoring motion more efficiently. Set
MOTION DET to ON to enter into the Motion
Det subdirectory for settings.
• ZONE NUMBER: Select 1~8 to adjust the
settings of the area (zone) for motion
to be detected.
• ZONE STATE: Set to ON to display the detection zone on the screen,
set to OFF to hide the detection zone on the screen.
• WIDTH, HEIGHT: Customize the size of detection zone by adjusting
the width and height.
• MOVE X: Determines the coordinate of the vertical axis for
selected zone.
• MOVE Y: Determines the coordinate of the horizontal axis for
selected zone.
• SENSITIVITY: Increase motion detection sensitivity by increasing
this setting.
• PREVIOUS: Return to previous page.

ZONE NUMBER

ZONE 1

ZONE STATE

OFF

WIDTH

20 ---|----------

HEIGHT

30 ------|-------

MOVE X

15 ---|----------

MOVE Y

25 ----|--------

SENSITIVITY

50 -----|-------

INITIAL SET

ITS MODE

OFF

MOTION DET

OFF

PRIVACY MASK

OFF

LANGUAGE ENGLISH

STABILIZER OFF

L/L SYNC

INT

MONITOR TYPE

CRT

FACTORY RESET

COMM SET