Wdr/blc/eclps – Staub Electronics WPS-750-BUL-AH WIREPATH - SURVEILLANCE 750-SERIES BULLET ANALOG OUTDOOR CAMERA WITH IR AND HEATER (650TVL) User Manual

Page 17

WPS-750-BUL-AH Installation Manual

EXT Setting
By selecting the EXT value in the Day/Night
Mode and pressing MENU, you can enter into
a subdirectory to adjust the IR WDR LEVEL
and IR WDR DEST.

• IR MODE: The IR level can be switched
to ON or OFF.
• IR DEST: IR Destination is used to spread the IR light to

evenly fill the scene with the same IR intensity.

• PREVIOUS: Return to previous page.

WDR/BLC/ECLPS

Select one of three mode options:
Wide Dynamic Range, Back Light
Compensation or Eclipse.

WDR (Wide Dynamic Range) Setting
When there are both bright and
dark areas in the scene at the same
time, this setting balances the contrast
between the two areas. This makes
the picture distinctive and clear so
the object has optimum detail and color.
• WDR LEVEL: Choose SUPER, HIGH,
MIDDLE or LOW based on the environment.

• NIGHT ECLIPSE: Choose ON DARK for low lux

environments when IR is not used. Choose

ON IR for use at night when IR LEDs are on.
Refer to ECLIPSE setting on page 16 for more information

• PREVIOUS: Return to previous page.

BLC (Back Light Compensation) Setting

This function corrects the exposure of
subjects in front of a bright light source.

• BLC LEVEL: Set the BLC LEVEL by
selecting LOW, MIDDLE, or HIGH.
• PREVIOUS: Return to previous page.

IR MODE

OFF

IR DEST

32 -------|--------

WDR LEVEL

HIGH

NIGHT ECLIPSE
PREVIOUS

BLC LEVEL

HIGH

1. CAM NAME

OFF

2. LENS

DC IRIS

3. EXPOSURE

4. DAY/NIGHT

DAY

5. WDR/BLC/ECLPS

WDR

6. WHITE BAL

ATW

7. 3D-DNR

8. EFFECTS

9.SPECIAL

0. EXIT

RET