Staub Electronics WPS-750-BUL-AH WIREPATH - SURVEILLANCE 750-SERIES BULLET ANALOG OUTDOOR CAMERA WITH IR AND HEATER (650TVL) - Manual (Page 10)

10
WPS-750-BUL-AH Installation Manual
CAM NAME
LENS
EXPOSURE
OFF, ON
DC IRIS
MANUAL
AGC
SHUTTER
SENSE-UP
INITIAL SET
PREVIOUS
BRIGHTNESS 0-100 (50)
OFF, LOW, MIDDLE, HIGH
Auto, X2~X512 (Auto X8)
AUTO, OFF, A. FLK, 1/160, 1/250, 1/500, 1/700, 1/1000,
1/1600/ 1/2500, 1/5000, 1/7000, 1/10000, 1/30000,
1/50000, 1/90000, X2, X3, X4, X5, X6, X8, X10, X12, X14,
X16, X24, X32, X64, X128, X256, X512
SET-UP
OSD Menu Structure
Settings have been preconfigured for optimal performance in most
applications. If adjusting the settings produces a poor picture,
factory reset the camera to restore the original settings (see p.21)
Bold indicates factory preset
Operating the OSD Menu
• To view the OSD, the OSD Joystick / BNC Test Adapter must be
connected to a display monitor or WPS-CCTV-TESTER (not included).
• The button found on the pigtail provides five separate actions: UP,
DOWN, EXIT, ENTER and MENU.
• Press the button to enter into the OSD MENU page.
• Press UP, DOWN, EXIT (Left) or ENTER (Right) to select items on the
menu and begin configuration.