Installation, Overview of typical installation – LiftMaster LA412 Solar Powered Residential Gate Operator User Manual
Page 10

9
12
gauge
wire
8 ft.
(2.4 m)
DUAL GATE
Earth Ground
Installation (Optional)
Solar Panel
(Facing South)
Antenna
Hinge
Warning Sign
Post Bracket
Gate Bracket
Gate 1
Operator Cable
Control Box with
Batteries
PVC Conduit (not provided) to protect the
power cable for solar and low voltage wire
from lawn mowers and string trimmers.
Photoelectric Sensors
Extension Cable
Photoelectric Sensors
Junction Box
Gate 2
NOTE: One or more non-contact sensors shall be located
where the risk of entrapment or obstruction exists at
either the opening or closing direction. Care shall be
exercised to reduce the risk of nuisance tripping, such as
when a vehicle, trips the sensor while the gate is still
moving.
INSTALLATION
» OVERVIEW OF TYPICAL INSTALLATION
12 Gauge
Wire
8 feet
(2.4 m)