LevelOne FNS-1020 - Manual (Page 22)

22
Network Settings
LAN Configurations
These are the various network settings for the FNS-1020.
General Settings
Device IP The default IP address of FNS-1020. However if the
device obtained an IP address from a DHCP server,
then the IP address will be different
Host Name The identification name of the FNS-1020 when you
browse for it on your network.
DHCP Mode
Client The FNS-1020 will receive an automatic IP address from
a DHCP server on your network.
Server FNS-1020 will become a DHCP server on the network
and allocate IP addresses to other devices.
Static Manually Configure the IP address and subnet mask of
the FNS-1020
Auto Let the FNS-1020 determine whether to use Client or
Server mode.