LevelOne PLI-3410 - Manual (Page 53)

53
Wireless Security/Encryption Settings
Security Mode: You can disable or enable the wireless security function using WEP or WPA for
wireless network protection. The default mode of wireless security is disabled. Please refer to the
Security Mode section for detail description.
Access Policy
Policy: Select from the drop-down menu to choose whether the entered MAC Address should be
allowed to pass (Allow) or to be blocked (Reject).
Note: When the Policy is selected Allow, all the MAC addresses you entered in the Add a
station MAC address field will be pass; when the Policy is selected Reject, all the MAC
addresses you entered in the Add a station MAC address field will be blocked.
Add a station MAC address: Enter the MAC address of the wireless client.