LevelOne PLI-3410 - Manual (Page 41)

41
QoS Tab
This function allows user the flexibility to manage the bandwidth usage for each HomePlug device.
The higher the QoS priority the more bandwidth usage is allocated to that particular device.
To set the QoS priority of each device:
1. Click to select the type that you want to set the QoS priority.
2. In the Priority setting field, click on Add/Modify button, then enter the IP address/MAC address
and drag the Priority slider to either Low, Normal, Medium or High position. When the position of the
slider is set, click Confirm to save the settings. You will see a new entry displayed in the table above.
3. After the setting of QoS is completed, click Apply to confirm the setting.