LevelOne PLI-3410 - Manual (Page 25)

25
Internet Access Configuration
To configure this device for internet access, you must have IE 5.0 / Netscape 4.5 or above
installed on your computer. There is basically one way to configure your device before you are
able to connect to the internet: Web Interface. Configuration of this method will be discussed in
detail in the following section.
Configuring with your Web Browser
Open your web browser, enter the IP address of your Ethernet Adapter which by default is
192.168.1.1, and click
“Go”. A user name and password window prompt will appear. The default
username and password are “admin” and “admin”.
Congratulations! You are now successfully logon to the PLI-3410 200Mbps HomePlug AV
Wireless Combo Adapter!
If the authentication succeeds, the homepage will appear on the screen.