LevelOne FBR-1461 - Manual (Page 64)

64

External Port: This is the Port or Port Range that defines the application.

Direction: Determine whether the rule is for outgoing packets or for incoming packets.

Time Schedule: It is self-defined time period. You may specify a time schedule for your
prioritization policy. For setup and detail, refer to Time Schedule section.

Log:
Choose “log” if you wish to generate logs when the filer rule is applied to a packet.

Add: Click this button to add a new packet filter rule and the added rule will appear at
the bottom table.

Edit:
Check the Rule No. you wish to edit, and then click “Edit”.

Order: Use the Up and Down arrows to change the order of the entries.

Delete: First check the Delete tick box of the rule you wish to delete, and then click the
“Edit/Delete” button.
If the DHCP server option is enabled, you must be very careful in assigning IP addresses
of a filtered private IP range to avoid conflicts because you do not know which PC in the
LAN is assigned which IP address. The easiest and safest way is that the filtered IP
address is assigned to a specific PC that is not allowed to access an outside resource
such as the Internet. You configure the filtered IP address manually for this PC, but it
stays in the same subnet with the router.