JuiceGoose NXRT Series - Manual (Page 43)

NXRT‐1000, NXRT‐1500, NXRT‐2000, NXRT‐3000 USER’S MANUALUNINTERRUPTIBLE POWER SUPPLY (UPS)
4. The input AC Circuit Breaker will trip to the OFF position in the event that the internal EBP
charger draws excessive current.
Extended Battery Pack Installation
CAUTION: Extended Battery Pack (EBP) Installation should be performed by qualified service
personnel.
1. Verify that the DC circuit breaker on the rear panel of the EBP is in the OFF position.
2. Turn the UPS OFF and disconnect the UPS Input Cord from the AC wall outlet.
3. Remove the EBP connector cover from the UPS rear panel.
4. Connect the external DC battery cable from the EBP to the appropriate connector on the UPS.
[43]