JuiceGoose NXRT Series - Manual (Page 13)

NXRT‐1000, NXRT‐1500, NXRT‐2000, NXRT‐3000 USER’S MANUALUNINTERRUPTIBLE POWER SUPPLY (UPS)
Please handle the UPS and associated equipment with extreme caution since a high amount of energy is
contained in the batteries. Always keep the unit in an upright position as marked on the packaging, and
never drop the unit.
Please adhere to the following instructions if the UPS is not installed immediately:
• Store the equipment as is in its original packing and shipping carton.
• Do not store in temperatures outside the range of ‐15°C to +25°C
• Ensure that the equipment is fully protected from wet or damp areas and from moist air.
In order to maintain the batteries, the UPS should be recharged every 6 months for at least 8 hours.
If flammable substances such as gases or fumes are present, or if the room is airtight, a hazardous
situation may exist in which no electrical equipment should be operated.
The instructions in this manual explain how to install the UPS safely. Not acknowledging such electrical
hazards may be fatal – keep this manual for future reference.
WARNING!
It is strongly recommended that the UPS cabinet not be opened as components have very
high voltage and touching those components may be fatal. Only a qualified technician or
authorized agent may service the unit.
The UPS unit’s output receptacles carry live voltage even when not connected to an input
voltage source. The UPS has its own internal energy source.
Environment
Ensure that all environmental concerns and requirements are met according to specifications listed in
this document, otherwise the safety of installation personnel cannot be guaranteed, and the unit may
malfunction.
Ensure that you remember the following when locating the UPS system and battery options:
• Avoid extremes of temperature and humidity. Maximum battery life can be attained with a
recommended temperature range of +15°C to +25°C.
• Provide protection for the equipment from moisture.
• Space and ventilation requirements must be met. Ensure there is 100mm behind and 50mm on
the sides of the UPS for proper ventilation.
• Ensure that the front of the UPS remains clear for user operation.
[13]