Gilderfluke&Co Br-miniBrick8 User Manual
Page 9

• The Br-miniBrick8 supports update rates from one frame per second to a
maximum of one hundred frames per second when using the PC•MACs soft-
ware. Different shows can each be programmed at different frame rates. This
allows you to program a ʻdelayʼ show that ticks along at a low frame rate be-
tween your main shows.
• The eight digital outputs from a single Br-miniBrick8 can be fed to a Digital to
Analog converter (like our DAC-08) wherever you need a programmable 0-10
volt analog control signal.
• The Br-miniBrick8 runs on anything from 9-24 VDC . Br-miniBrick8s can
even be run from batteries or solar cells.
• Sturdy 2.75” x 2” x .75” aluminum case.
• Br-miniBrick8s mount in standard Augat 2.75” ʻSnap Trackʼ, velcro, or using a
pair of screws.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-miniBrick8 v3.+ Manual / 8/17/12 / page 3 of 36