Software installation steps – Sonnet Technologies 3Gb_s RAID Controller Card User Manual
Page 4

Windows XP/Server 00 Driver and Software
Installation
This section describes the installation of drivers to support the
Sonnet RAID controller in systems running Windows XP or
Windows Server 2003.
1. Start Windows and log on as System Administrator.
2. Insert the included software CD; an Internet Explorer
window will appear.
3. Click the Windows Drivers link in the upper left corner.
4. Click the link for the drivers that apply to your computer.
5. If you are using a 32-bit version of Windows XP, click the
Install Scsiport Driver link under the Windows XP heading.
If you are using a 64-bit version of Windows XP, or any
version of Windows Server 2003, click the Install Storport
Driver link under the appropriate heading.
6. When the Internet Explorer warning window appears,
check or uncheck the checkbox per your needs, and then
click Yes.
7. When the File Download - Security Warning window appears,
click Run.
8. When the Internet Explorer - Security Warning window
appears, click Run and the installer will launch.
9. When the ATTO Windows Driver Installer window appears,
click Install.
10. When the Setup window appears, click OK.
11. When the Software Installation window appears, click
Continue Anyway.
12. After the driver installation is complete, a window will
appear with a message stating no adapter was detected; click
No to close the window and continue with the software
installation.
13. Back in the browser window click the Windows Applications
link on the left.
14. Click the Install Configuration Tool link.
15. When the File Download - Security Warning window appears,
click Run.
16. When the Internet Explorer - Security Warning window
appears, click Run and the installer will launch.
17. If the installer window is hidden, click the Configuration
Tool button in the taskbar to bring the window to the front.
Click Next.
18. When the next window appears, click the radio button next
to the option to accept the license agreement, and then click
Next.
19. When the Choose Install Folder window appears, click Next
to accept the default installation location.
20. When the Choose Install Set window appears, click the Full
Installation icon, and then click Next.
21. When the Choose Java Virtual Machine window appears, click
the radio button next to the Choose a Java VM specifically
for this application option, and then click Next.
22. When the Pre-Installation Summary window appears, click
Install.
23. When the Install Complete window appears, click Done.
24. Back in the browser window, click the Install Windows
Utilities link.
25. When the File Download - Security Warning window appears,
click Run.
26. When the Internet Explorer - Security Warning window
appears, click Run.
27. When the Welcome to the ATTO HBA Utilities Setup Wizard
window appears, click Next.
28. When the Select Installation Folder window appears, either
accept the default location or choose a new one, and then
click Next.
29. When the Confirm Installation window appears, click Next.
30. After the utilities have been installed, an Installation
Complete window appears; click Close to exit.
31. Shut down your computer, and proceed to Hardware
Installation on page 6.
Software Installation Steps