Sonnet Technologies Aria extreme CardBus and PCI Card Windows - Manual (Page 65)

57
Cannot Connect to Access Point
If you cannot make a connection to an Access Point, it could be due to one of the following
reasons:
•
Physical connection problems at the Access Point. Check the AP and verify all the
connectors are plugged or screwed in securely.
•
Incorrect network name (SSID). Make sure the SSID used is the same for both the
Aria extreme and the Access Point.
•
Security settings different. Make sure the security settings are the same for both the
Aria extreme and the Access Point.
•
Operation mode not configured properly. Make sure the Aria extreme is configured
to allow Infrastructure connections.
•
Make sure you are not trying to connect to an 802.11a Access Point. 802.11a and
802.11b/g standards are not interoperable.
•
The Access Point has reached its maximum number of supported clients.
•
MAC address access control is enabled on the Access Point. If this is the case,
make sure your Aria extreme card’s MAC address is on the “Allow Access” list.