SecurityMan PalmCam - Manual (Page 16)

16
INSTALLATION & USAGE
Camera installation and usage:
Ensure the camera is fully charged. Place the magnetic base 1. of the camera on
a metal body where you will have the best viewing angle for the targeted object
or hitch. The viewing angle can be adjusted by the camera bracket.
Remove the weatherproof cover of the camera, turn on the camera by rotating 2.
the power switch from OFF to ON. The power indicator LED will turn green
once the camera is on.
Replace the weatherproof cover on the back side of the camera. The clear ver- 3.
sion of the cover allows you to see the power indicator LED. Always operate
the camera with its cover in place.
The camera has infrared LED’s (IR) built-in for night vision capability. It will turn 4.
on automatically when it is in low light conditions and will show black and white
images. The night vision range is about 10ft.