SecurityMan DigioutAir - Manual (Page 15)

Channel
Signal Strength
No Signal
14
On-Screen Display
Signal Strength
The signal bars on the
on-screen display indicates
the signal strength between
the camera and the receiver.
[0~1 bars = weak/no reception;
4 bars = strong reception]
Channel
The channel number corresponds to the camera that is being monitored
or recorded. You can toggle between channels by simply pressing the
“CH” button located on the receiver.
No Signal
A “NO SIGNAL” notification will be displayed (followed by a melody)
whenever the user toggles to a channel with no camera matched to it or
if the camera and receiver are not successfully matched.
NOTE: The “Channel” and “Signal Strength” icons will turn orange during
the no signal warning.
Operation
Adding and Pairing camera to the receiver
To pair multiple cameras to your receiver (4max), simply switch the
receiver to a channel that is not in use or no signal and simultaneously
press on both Pairing button’s located on the camera and the receiver.
If it is a new add-on camera, please be sure to pair the camera close
by (within 20ft recommended) the receiver first before securing the
camera to a desire location. The camera image will immediately be
displayed on the screen after successfully being matched and paired
to the receiver. The manufacturer default setting for the camera is
channel 1.