SecurityMan DigioutAir User Manual

Page 14

Text mode
Original mode

AV Output to

TV/DVR/VCR

Input

2. Plug in the receivers power supply and connect the AV (audio/video)
cable from the AV output of the receiver to your TV or recording
devices (VCR or DVR) AV input.

NOTE: Make sure all cords are connected tight and that you are

following the proper color coding (Video/Yellow, Audio/White or Red)

3. Turn on your TV and set it to the appropriate input channel. The
television must be on the A/V Input that you connected the receiver to.
For example A/V 1, Input 1, Video 1 or Line 1. Once the television
is on the proper input channel and the receiver is powered ON, you
should receive your picture and be able to hear audio from the camera’s
microphone. The graphic user’s interface will display on the monitor as
shown below.

NOTE: To tune your TV to the proper input channel, you must do it
directly on the TV itself or with the original TV remote.